ZJBENY: AC EV Charger with cable

BENY Electric is a trusted manufacturer of protective components for photovoltaic systems across the globe. BENY’s experience of working in the electrical industry for more than 30 years allows thrm to create solar DC components that comply with the latest DC standards. Through focus on solar DC protection design, production, and marketing, can bring brand-building PV protection solutions.

Categories: ,

Product Overview


  • Type 2 (IEC 62196-2) plug with cable

Dynamic Load Balancing

PEN Fault Detection

  • Built-in Type B RCD for leakage protection
  • Over Temperature Sensor
  • Clip-on Grid Current Sensor
  • LED ring status indication
  • With emergency stop switch


To safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way.

DLB (Dynamic Load Balancing) is available in the BENY BCP series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.


BENY EV chargers can be controlled by a smart APP via WIFI or Bluetooth connection:

✔ One to one binding EV charger by resetting the password, prevent the EV charger being stolen;

✔ View charging data and status;

✔ Set up various charging configurations, charging current, DLB mode, etc.

✔ Scheduled charging;

✔ Firmware update.


Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor.

  • if the user uses an EV charger equipped with PEN protection, its internal design has a contactor to cut off the ground,
  • once the PEN line is cut off, the contactor KM1 and KM2 are immediately and automatically disconnected,
  • there is only a weak leakage current between CP and PE to L line,
  • its current value is less than 1mA, which is the smallest perceived leakage current of the human body, people can disengage themselves, no safety risks.


Charging capacity1.3kW-7.4kW / 4.1kW-22kW
Charge modeMode 3 (IEC 61851-1)
Output powerSelectable 1-phase or 3-phase, 230-400V6 A to 32 A, 50-60 Hz
Connector optionsFixed cable type 2 plug or type 2 Socket
Fixed cable length6m (18 ft)
Cable EntryRear or bottom
Protection and certification
Build-in RCDTYPE A + DC6mA leakage sensor built-in
With CableIP65, IK07
SocketIP65, IK07
Housing fire ratingsV0
Operating temperature-25 – +55℃
ComplianceIEC61851-1, IEC61851-21-2,IEC61000-4

CE EMC EU/2014

CE Low Voltage EU/2014/35

CertificateCE, UKCA, CB, RCM
AuthorizationAuto-start standard / RFID card option
Status indicationLED ring
Charging protocolOCPP 1.6J optional
WLAN communicationWi-Fi / Bluetooth 4.2 option
DimensionW169 x H380 x D151 mm
MountingWall or Pole


There are no reviews yet.

Be the first to review “ZJBENY: AC EV Charger with cable”

Your email address will not be published. Required fields are marked *